|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
| Rotary Tooling |
Home >
Rotary Tooling > BT 40/50
|
 |
|
|
|
|
ER COLLET CHUCKS HIGH BALANCED SERIES
|
|
|
|
|
|
|
|
 HIGH BALANCED STUB ER COLLET CHUCK
|
| EDP No. |
Type |
Taper No. |
d |
L |
D |
Collet
Series |
| BH232B25 | BT 40-ER20-2.20 | 40 | .039-.511 | 2.20 | 1.26 | ER20 |
| BH233B25 | BT 40-ER25-2.50 | 40 | .039-.629 | 2.50 | 1.65 | ER25 |
| BH234B25 | BT 40-ER32-2.40 | 40 | .078-.787 | 2.40 | 1.88 | ER32 |
| HIGH BALANCED STANDARD ER COLLET CHUCK
|
| EDP No. |
Type |
Taper No. |
d |
L |
D |
Collet
Series |
| BH030B25 | BT 40-ER11-3.00 | 40 | .019-.275 | 3.00 | 0.63 | ER11 |
| BH031B25 | BT 40-ER16-2.88 | 40 | 1/32-13/32 | 2.88 | 1.08 | ER16 |
| BH032B25 | BT 40-ER20-4.00 | 40 | .039-.511 | 4.00 | 1.26 | ER20 |
| BH133B25 | BT 40-ER25-4.00 | 40 | .039-.629 | 4.00 | 1.65 | ER25 |
| BH134G25 | BT 40-ER32-4.00 | 40 | .078-.787 | 4.00 | 1.88 | ER32 |
| HIGH BALANCED EXTENDED ER COLLET CHUCK
|
| EDP No. |
Type |
Taper No. |
d |
L |
D |
Collet
Series |
| BH331B25 | BT 40-ER16-4.88 | 40 | 1/32-13/32 | 4.88 | 1.08 | ER16 |
| BH332B25 | BT 40-ER20-6.00 | 40 | .039-.511 | 6.00 | 1.26 | ER20 |
| BH333B25 | BT 40-ER25-6.00 | 40 | .039-.629 | 6.00 | 1.65 | ER25 |
| BH334B25 | BT 40-ER32-6.00 | 40 | .078-.787 | 6.00 | 1.88 | ER32 |
| HIGH BALANCED EXTRA EXTENDED ER COLLET CHUCK
|
| EDP No. |
Type |
Taper No. |
d |
L |
D |
Collet
Series |
| BH432B25 | BT 40-ER20-8.00 | 40 | .039-.511 | 8.00 | 1.26 | ER20 |
|
|
 |
|
